Piezoelectric Bending Transducer (S118-J1SS-1808YB)
S118-J1SS-1808YB
Piezoelectric Bending Transducer
$132.00
132.00
In stock
2.18 x 0.92 x 0.018 in. PZT 5J, 1-Layer Bender with Sealed Mounting
Lead Time: Up to 15 Business Days, + Shipping - Shipping & Ordering
ROHS:Piezo exempt.Product compliant.
A single layer product recommended for energy harvesting and sensing applications. It also exhibits good performance as a resonant actuator. It is not recommended for applications requiring high force output. This product does not have mounting and alignment holes like the other products.
Piezo Material Properties: More information on our Piezo Material Properties »
Please Note: It is Piezo.com’s policy to only send out fully functioning, inspected products… read more »
Dimensions
Layer Specifications
| Layer Material | Thickness mils / mm |
| Polyester | 2.0 / 0.05 |
| Copper | 1.4 / 0.03 |
| PZT 5J | 6.0 / 0.15 |
| Stainless Steel 304 | 6.0 / 0.15 |
| Polyimide | 1.0 / 0.03 |
General Specifications
| Parameters | Specifications |
| Length (mm.) | 55.4 |
| Width (mm.) | 23.4 |
| Thickness (mm.) | 0.46 |
| Temperature Range | -60° C to 120° C |
| Mass (grams) | 2.8 |
| Capacitance (nF) | 100 |
| Rated Drive Voltage (+/-V) off of Resonance | 120 |
| Free Deflect (+/-mm) | 0.48 |
| Blocked Force (N) | 0.14 |
| Spring const (N/mm) | 0.299 |
| Max Amplitude (mm) | 2.0 |
| Resonant Freq (Hz) | 100 |
| Max Drive Volts @ Resonance (V) | 10.0 |
Harvester / Generator Specifications
| Parameter | No tip mass (unloaded) |
| EH Resonant Freq (Hz) | 130 |
| Open Circuit Output (+/- Volts/G) | 6 |
| Resistor Load (Ohm) | 15700 |
| Power @ Rated G (mW) | 0.7 |
| G rating (+/- G's) | 8 |