50 Hz Piezoelectric Fan Kit
Please note that this fan requires bias voltage electronics, provided below, to be driven off of line power. Failure to do so will damage the device.
Piezoelectric fans are solid state devices without wearing parts. The oscillating FR4 blade is driven at resonance (50Hz in this case) by a piezo bending element. In free air, the high amplitude resonant vibration of the plastic blade causes the formation of a high-velocity flow stream. Maximum airflow occurs along the axis of the fan's centerline. Air intake is above and below the swept out volume of the blade. Its simple design lends itself to low cost in high volume production.
See our help center for an in-depth user guide on the PIEZO.com sealed piezo fan.
- Lower Power Consumption
- Ultra Light Weight
- Thin Profile
- High Reliability
- No EMI
- Instant starting with no power surge (especially durable for spot cooling)
- Extremely low magnetic permeability
- Negligible heat dissipation (ideal for sealed enclosures)
- Wide temperature range
|Power Consumption||1 W|
|Volume Flow Rate||10 CFM (283 l/s)|
|Peak to Peak Tip Displacement||1.3 inch (33 mm)|
PIEZO.com fans can be connected to 240V line power with the DC Bias conditioning circuit. This circuit increases the voltage tolerance of the piezo by generating and applying a DC offset to the piezo fan, allowing it to run at a higher voltage. The schematic for the circuit is shown below.
|QTY||Parts||Description||Manufacturer Part Number|
|1||C2A||1uF, 450V, SMT Capacitor||C5750X7T2W105M250KE|
|1||C2B||DNI (1uF, 450V, Radial Capacitor)||UPW2W010MPD|
|1||C1A||10uF, 450V, Radial Capacitor||EEU-EE2W100U|
|4||R3A, R3B, R3A1, R3B1||499 Kohms, SMT Resistor||RC1206FR-07499KL|
|1||F1||80mA, 250V, 5x20mm Fuse||5ST 80-R|
|2||D3A, D3B||1kV, 1A diode||S1M-13-F|