Effective clamping is vital for the piezo products to perform properly. This clamp kit includes all the necessary materials and parts to get started with testing and evaluating sealed piezo product (these are piezos with a part number beginning with 'S'). This kit was designed for initial testing and feasibility analysis; but it can also be incorporated into your end product/ system. Piezo.com also offers design services if a modified clamp configuration is required.
Kit Contents
Part Number
Description
Quantity
52965A17 (McMaster)
Nut Driver (5.5 mm)
1
5334A32 (McMaster)
Hex Key (2.5 mm)
1
7619A19 (McMaster)
Orange Electrical Tape ¾” Wide, 22 yds long 7
1
75145A68 (McMaster)
Vibra-Title Reusable Threadlocker
1
91292A110 (McMaster)
Screw M3-0.5 x 5mm, 18-8 Stainless Steel
20
91292A114 (McMaster)
Screw M3-0.5 x 12mm, 18-8 Stainless Steel
20
91292A123 (McMaster)
Screw M3-0.5 x 20mm, 18-8 Stainless Steel
5
91828A211 (McMaster)
Nut, M3-0.5, 18-8 Stainless Steel
100
93475A210 (McMaster)
Washer, flat, M3, 18-8 Stainless Steel
100
MM-B-16 (K&J Magnetics)
Magnet w/M3 Through Hole, 8.8 lb of Pull Force
8
PPA-5001
Clamp Base (Glass Filled Nylon-12)
1
PPA-5002
Clamp Bar (Aluminum 6061, 1/16” Thick)
2
PPA-5003
Tip Mass Accessory (Aluminum 6061, 1/16” Thick)
2
PPA-7001-1800
M3 Ring Terminals to Bare Wire Cable, 1.8 meters (6 feet)
1
PPA-7001-0150
M3 Ring Terminals to Bare Wire Cable, 150mm (6 in)
