Sealed Piezo Selection & Clamping Kit
KIT-009
Sealed Piezo Selection & Clamping Kit
$1,000.00
1,000.00
In stock
Clamping hardware and 7 "sealed" piezo transducers kit
ROHS:Piezo exempt.Product compliant.
Lead Time: Typically 1 day, plus shipping - Shipping & Ordering
Sealed Piezo Selection & Clamping Kit
Effective clamping is vital for the piezo products to perform properly. This clamp kit includes all the necessary materials and parts to get started with testing and evaluating the piezo product. This kit was designed for initial testing and feasibility analysis; but it can also be incorporated into your end product/ system. Piezo.com also offers design services if a modified clamp configuration is required.
Also included in this kit is all of 7 of our sealed benders to allow you to quickly understand which model is right for you and the differences between them. The contents of the kit are over $1,500 so this kit also offers a cost-effective way to prototype.
Kit Contents
| Part Number | Description | Quantity |
|---|---|---|
| S128-J1FR-1808YB | 2.80 x 1.00 x 0.028 in. PZT 5J, 1-Layer Bender with Sealed Mounting | 1 |
| S230-J1FR-1808YB | 2.80 x 1.00 x 0.03 in. PZT 5J, 2-Layer Bender with Sealed Mounting | 1 |
| S452-J1FR-1808YB | 2.80 x 1.00 x 0.052 in. PZT 5J, 4-Layer Bender with Sealed Mounting | 1 |
| S128-H5FR-1107YB | 2.09 x 0.82 x 0.028 in. PZT 5H, 1-Layer Bender with Sealed Mounting | 1 |
| S233-H5FR-1107YB | 2.09 x 0.82 x 0.0325 in. PZT 5H, 2-Layer Bender with Sealed Mounting | 1 |
| S129-H5FR-1803YB | 2.80 x 0.41 x 0.029 in. PZT 5A, 1-Layer Bender with Sealed Mounting | 1 |
| S234-H5FR-1803YB | 2.80 x 0.41 x 0.02 in. PZT 5A, 2-Layer Bender with Sealed Mounting | 1 |
| 52965A17 (McMaster) | Nut Driver (5.5 mm) | 1 |
| 5334A32 (McMaster) | Hex Key (2.5 mm) | 1 |
| 7619A19 (McMaster) | Orange Electrical Tape ¾” Wide, 22 yds long 7 | 1 |
| 75145A68 (McMaster) | Vibra-Title Reusable Threadlocker | 1 |
| 91274A101 (McMaster) | M3 Bolt, 12mm Long | 20 |
| 91274A106 (McMaster) | M3 Bolt, 12mm Long | 20 |
| 91274A109 (McMaster) | M3 Bolt, 20mm Long | 5 |
| 90591A121 (McMaster) | M3 Nut (Zinc Plated Steel) | 100 |
| 91166A210 (McMaster) | M3 Washer | 100 |
| MM-B-16 (K&J Magnetics) | Magnet w/M3 Through Hole, 8.8 lb of Pull Force | 8 |
| PPA-5001 | Clamp Base (Glass Filled Nylon-12) | 1 |
| PPA-5002 | Clamp Bar (Aluminum 6061, 1/16” Thick) | 2 |
| PPA-5003 | Tip Mass Accessory (Aluminum 6061, 1/16” Thick) | 2 |
| PPA-7001-1800 | M3 Ring Terminals to Bare Wire Cable, 1.8 meters (6 feet) | 1 |
| PPA-7001-0150 | M3 Ring Terminals to Bare Wire Cable, 150mm (6 in) | 1 |