Description: A 2-layer element behaves like a single layer when both layers expand (or contract) together. If an electric
field is applied which makes the element thinner, extension along the length and width results. Typically, only motion along one axis
is utilized. Extender motion on the order of microns to tens of microns, and force from tens to hundreds of Newtons is typical.
Double Quick-Mount bending motors provide bolt-down convenience on two ends. Users are saved the trouble
of mounting and wiring transducer elements. They are easily attached and removed from equipment using the clearance holes in the
PCB mounts. They are wired for low voltage operation and the board mounted bleed resistor protects the transducer and user
electronics from transient voltages arising from thermal and mechanical shocks. The user may mount a payload on the power-take-off
Standard Double Quick-Mount extenders employ T220-A4-103X, T220-A4-203X, T220-A4-303X, and T220-A4-503X standard brass
reinforced transducers. They are more economically priced than other Double-Quick-Mount configurations, and are generally stocked for
immediate delivery. Add a Double Quick-Mount to any "-103", "-203", "-303", and "-503" size transducer.
"-103", "-203", and "-303" Double Quick-Mount extension performance based on 1.125" active length.
"-503" Double Quick-Mount extension performance based on 2.25" active length.
Motion and force are measured at the outermost tip of the mounting pad.
A Quick-Mount version is also available for "-103", "-203", "-303" and "-503" sizes.