||PIEZO SYSTEMS, INC.
65 Tower Office Park Woburn, MA 01801 USA
Tel: 781-933-4850 Fax: 781-933-4743 email: firstname.lastname@example.org
PROPORTIONAL VOLTAGE BOOSTER
(0 - 250 VDC)
Description: The Proportional Voltage Booster provides a simple means of obtaining the high DC voltage used for driving
piezoelectric devices statically. It requires only a low-voltage DC supply (or the output of an op-amp) on the input leg and a drain
resistor on the output leg.
The Voltage Booster is small, PCB mountable, and well suited for low current / high voltage applications. Output voltage
is proportional to input voltage, and is linear from ~10% to the maximum output voltage.
• Low output ripple,
• Floating output to enable the user to choose either positive or negative drive,
• Short circuit protection,
• Reverse polarity protection.
0 to +12 VDC
85 mA (nominal)
0 to +250 VDC (nominal)
5% (1/2 to full load)
< 0.5% p-p
-20 to +70°C
Output voltage as a function of Input voltage.
A 500K ohm discharge resistor across the output terminals is recommended
to sink charge when input voltage is removed.
NOTE: Choose "add to basket" to proceed to the shopping cart and select the quantity. Quantity pricing will be automatically calculated.
Proportional Voltage Booster
piezo electronics, amplifiers, piezo amplifiers, drivers, piezo drivers, piezo electronics, high
voltage amplifiers, linear amplifiers, high voltage DC, piezo devices, piezoceramic devices, piezoelectric devices