Double Quick-Mount piezoelectric bending motors provide bolt-down convenience on two ends. Users are saved the trouble
of mounting and wiring transducer elements. They are easily attached and removed from equipment using the clearance holes in the
PCB mounts. They are wired for low voltage operation and the board mounted bleed resistor protects the transducer and user
electronics from transient voltages arising from thermal and mechanical shocks. The user may mount a payload on the power-take-off
Standard Double Quick-Mount benders employ T220-A4-103Y, T220-A4-203Y, T220-A4-303Y, and T220-A4-503Y standard brass reinforced
transducers. They are more economically priced than other Double-Quick-Mount configurations, and are generally stocked for
"-103", "-203", and "-303" Double Quick-Mount bending performance based on 1.0" active length.
"-503" Double Quick-Mount bending performance based on 2.0" active length.
Motion and force are measured at the outermost tip of the mounting pad.
A Quick-Mount version is also available for "-103", "-203", "-303" and "-503" sizes.