||PIEZO SYSTEMS, INC.
65 Tower Office Park Woburn, MA 01801 USA
Tel: 781-933-4850 Fax: 781-933-4743 email: email@example.com
ADD A DOUBLE QUICK-MOUNT
TO ANY STANDARD
Have any standard size piezo element pre-mounted and wired on
one end and mounted on the power take-off end. Typical delivery is 2-3 weeks.
(Add a Double Quick-Mount to a -103 element)
(Add a Double Quick-Mount to a -203 element)
(Add a Double Quick-Mount to a -303 element)
(Add a Double Quick-Mount to a -503 element)
Piezo exempt. Product compliant.
piezoelectric benders or extenders save users the trouble of mounting and wiring the transducer
elements. They are easily attached and removed from equipment using the clearance holes in the PCB mount. A board mounted bleed
resistor protects the transducer and user electronics from transient voltages arising from thermal and mechanical shocks. Mounts
are provided on both ends.
Standard (brass reinforced) Double Quick-Mount Benders.
Standard (brass reinforced) Double Quick-Mount Extenders.
- Available for brass reinforced, non-magnetic, high performance and high strength elements.
- Available for -103, -203, -303 and -503 elements.
- Brass, Non-magnetic, and High Strength elements are wired for parallel operation unless otherwise requested.
- High Performance elements are wired for series operation only.
Designated "-103", "-203", "-303" and "-503"
What the Part Number
An Introduction to Piezoelectric Benders and Extenders
used as actuator (motor) elements.
for driving piezoelectric transducers.
PERFORMANCE SCALE FACTORS Values to be used as guidelines
can be made to order.
Please contact sales
for a quote.
Prices below are in addition to
the price of the transducer.
They are the price for adding a Double Quick-Mount to any standard size transducer.
NOTE: Choose whether the transducer is to be used as a B (Bender) or E (Extender). Then click "Add to Basket" to proceed
to the shopping cart. Select the quantity (quantity pricing will be automatically calculated).
Add D to -103 size
Add D to -203 size
Add D to -303 size
Add Dto -503 size
A single channel, high voltage, high current and high frequency amplifier designed to drive any load including piezoelectric stacks,
benders, and single sheets.
A single channel, high voltage, moderate current amplifier designed to drive various piezoelectric devices from DC to the low audio
±180 Vp / ±30 mA;
(115VAC/60Hz Input Adapter)
±180 Vp / ±30 mA;
(with Universal Input Adapter)
piezo, piezoelectric, piezoelectricity, piezoceramic, PZT, piezoelectric material, piezoelectric disks,
piezoelectric sheets, piezoelectric plates, piezoelectric transducer, piezoelectric actuator, piezoelectric motor, piezoelectric sensor,
piezoelectric consulting, piezoelectric engineering, bimorphs, piezoelectric bimorph, bender, piezoelectric bender, flexure,
piezoelectric drive electronics, linear amplifier, high voltage amplifier, energy harvesting, energy scavenging, piezoelectric oem product development,
ultrasonics, ultrasonic transducers, piezoelectric resonator, piezo fan, piezoelectric fan, piezoelectric mirror tilter, micropositioning,
piezoelectric products, piezoelectric device, quick-mount, quick mount, piezoelectric prototyping kits